Classification
What are the basic characteristics of titanium tube
Submitted by admin on 03/29/2016
The strength of titanium tube is close to that of ordinary steel, and the strength of some high strength titanium alloy is more than that of many alloy structural steels. At present, the aircraft engine components, skeleton, skin, fasteners and landing gear and so on are using titanium alloy. In the following, I will introduce the performance of titanium tube for you.
The using temperature of titanium tube is as much as several hundred times that of aluminum alloy, in the medium temperature, titanium tube still can maintain the strength that required.
The titanium alloy can be used in the humid air and seawater, the corrosion resistance is much better than the stainless steel, the corrosion resistance to pitting corrosion, acid corrosion is particularly strong, and it has excellent corrosion resistance to alkali, chloride, chlorine organic materials, nitric acid, sulfuric acid. But the corrosion resistance of titanium tube is poor in reducibility oxygen and chromic salts medium. At low temperature and super low temperature, titanium alloy still can maintain its mechanical properties. It is not suitable to be made the thin rod and thin wall parts, the amount of rebound of the machined surface is very large.
The using temperature of titanium tube is as much as several hundred times that of aluminum alloy, in the medium temperature, titanium tube still can maintain the strength that required.
The titanium alloy can be used in the humid air and seawater, the corrosion resistance is much better than the stainless steel, the corrosion resistance to pitting corrosion, acid corrosion is particularly strong, and it has excellent corrosion resistance to alkali, chloride, chlorine organic materials, nitric acid, sulfuric acid. But the corrosion resistance of titanium tube is poor in reducibility oxygen and chromic salts medium. At low temperature and super low temperature, titanium alloy still can maintain its mechanical properties. It is not suitable to be made the thin rod and thin wall parts, the amount of rebound of the machined surface is very large.
------分隔线----------------------------