professional titanium products manufacturer

The characteristics of titanium bars:

Titanium rod has the advantages of high tensile strength, low density, good mechanical properties, good resistance and corrosion resistance. It can be used in many fields, especially in civil, military, medical treatment. However, titanium bar has its shortcomings, such as high viscosity and difficult machining, in thermal processing, it is very easy to absorb hydrogen, oxygen, and nitrogen impurities, the abrasion resistance is poor and the production process is complex. Industrial production of titanium rod originated in 1948, due to the rapid development of the aviation industry, the titanium industry grown at a rate of 8% per year.

In the mid-1960s, titanium and its alloy has usually been used as electrode in electrolysis industry, condenser of power station, heater of oil essence and desalination of sea water and control equipment of environmental pollution, it also can be used as the part in the rocket, missile and high-speed aircraft. At present, the annual output of international titanium alloy processing material has reached 4 tons, and nearly 30 kinds of titanium alloy grades. The most widely used titanium alloy is TC4, TA5, TA7 and industrial pure titanium (TA1, TA2 and TA3), titanium alloy is mainly used for the production of aircraft engine compressor parts.

In the process of titanium bar, what matters should be paid attention to in the filter process of titanium bar filter?

1.First, when you use the titanium filter material, it is determined not to exceed its maximum capacity.
2.When using a titanium bar filter as a filter material, we should be sure to prevent the titanium rod from being hit or cut, and keep it well and not to be contaminated.
3.After using the titanium filter material, we must clean it and store it in a safe place.
4. Before the work of titanium rod filter, the titanium bar filter material should be started, after which can be transferred to the normal working environment.